-
...
-
...
-
Last Updated: 10/09/2024
in AMBIANCE - uPVC General
Every uPVC item that is cut in the Starke CNC has a label on it similar to below. The elements on this label are as follows: Window number from plans, eg “Window 6” Room number from plans, eg “Bedroom 3”. Note, sp...
-
...
-
See Also: https://starke.knowledgeowl.com/help/e-lok-setting-up-your-e-lok-door-for-the-first-time https://starke.knowledgeowl.com/help/setting-up-the-key-override-on-your-e-lok-door ...
-
Last Updated: 11/04/2024
in CONQA
...
-
Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 - Pin position while cutting the excess Step 9 - Where to cut new stay arm (after step 8) New Stay in position Step 10 ...
-
The diagram below is a helpful guide, but does not replace fully studying NZ4211 or Building Code F4 ...
-
General information PVC window profiles from aluplast are made of weatherproof, durable and easy-care material. The profiles are supplied from the factory with protective film or wrapped. Correct cleaning with the correct use of approved cleanin...
-
If the threshold of the Lift and Slide is Damaged, there are limited options for repair. It is suggested that a painter with bog and a colour matched spraycan follows the guide below.
...